Руководство По Работе для Panasonic KXMB2178HK

Note:
R You can hold the default resolution (feature #461).

Important:
R Make sure that the unit is set to the copy mode.

Scanner glass (A)

Original document

Enlarged copy

Original document

Reduced copy

Automatic document
feeder (y)

Original document

Enlarged copy

Original document

Reduced copy

R When using the scanner glass, the unit will enlarge the image starting from the upper left corner of the scanning

glass starting from the   mark.

R When using the automatic document feeder (y), the unit will only enlarge the centre of the document entrance

side of the document. To make an enlarged copy of the other side of the document, turn the document around,
and then make a copy.

Set the original.

Mq/ZOOMN (repeatedly): Select the zoom rate that fits the size of your document and recording paper. A MOK/
SETN
– “ZOOM  =100%”

– “50%”
– “200%”
*1 MCDN: Change the zoom rate by 1 % at a time from 25 % to 400 % if necessary. You can also enter the desired

percentage specifically by using the dial keys.

If necessary, enter the number of copies (up to 99).

Mx/STARTN

Note:
R After you finish copying, press Mw/STOPN to reset this feature.
R You can hold the previous zoom setting (feature #468).
R Zoom copy is not available for the following features:

– Quick ID copy feature (page 67)
– Image repeat feature (page 67)
– Poster feature (page 68)
– N in 1 feature (page 69)
– Separate N in 1 feature (page 69)
– Booklet feature (page 70)

64