Техническое Руководство для Nortel 8005 AC POWER SUPPLY 100V/240V 1140W/1462W
24 Chapter 1 Ethernet Routing Switch 8000 Series chassis power supplies
312751-E Rev 01
If a chassis has a redundant power configuration and one power supply fails, the
chassis continues to operate with no interruption of service.
chassis continues to operate with no interruption of service.
If a chassis has the minimum power supply configuration and one power supply
fails, the system loses power and network connectivity.
fails, the system loses power and network connectivity.
8004AC power supply
shows an 8004AC power supply.
Figure 2 8004AC power supply
Note: Nortel recommends that you install each power supply on its own
dedicated branch circuit. This ensures that a fault on another branch
circuit doesn’t cascade onto other branch circuits.
dedicated branch circuit. This ensures that a fault on another branch
circuit doesn’t cascade onto other branch circuits.
A redundant power supply provides protection against the failure of
another power supply in the system.
another power supply in the system.
Note: The following modules are not supported in the 8003 chassis with
Ethernet Routing Switch 8600 Software Release 4.1:
Ethernet Routing Switch 8600 Software Release 4.1:
•
8630GBR
•
8648GTR
•
8683XLR