Инструкции Пользователя для Kenwood DNX874S

■

Dashboard Camera: Select this when the 

dashboard camera is connected.

CMOS 3-Series Camera: Select this when 

the CMOS-3xx series with ID 2 set is 
connected.

Other: Select this when the other camera is 

connected.

OFF (Default): Select this when no camera is 

connected.

■

If you select [

CMOS 3-Series Camera] for 

[

Dashboard Camera /Front Camera], 

adjusts the CMOS-3xx series with ID 2 set. For 
details, see the instruction manual of your 
camera.

■

If you select [

ON] for Dashboard Camera /

Front Camera.
ON: Displays the picture from the front view 

camera horizontally reversed.

OFF (Default): Displays the picture from the 

front view camera as it is.

•  Install the rear view camera in the appropriate 

position according to the instructions supplied 
with the rear view camera.

•  When adjusting the parking guidelines, make 

sure to use the parking brake to prevent the car 
from moving.

Touch [ON] of [Parking Guidelines] in the 

Touch [Guidelines SETUP] in the Camera 

A

B

C

D

Make sure that A and B are horizontally 

parallel, and that C and D are the same 

length.

•  Touch [

Initialize] and after touch [Yes] to set all 

the 

 marks to the initial default position.

A Dashboard Camera, DRV-N520 (optional 

accessory), connected to this unit lets you play 

video-recorded data and so on.
For details, see the instruction manual of 

the Dashboard Camera DRV-N520 (optional 

accessory).

•  To connect a dashboard camera, see P.95.
•  Sets the dashboard camera/front camera as 

[

Dashboard Camera]. (P.70)

 

Ñ

Press the [MENU] button.

h

h

Popup menu appears.

Touch [Camera].