Инструкции Пользователя для Sony RSX-GS9
10
GB
When connecting a BLUETOOTH device for the first
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other.
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other.
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press and hold
on the unit for more
than 2 seconds.
Alternatively, press and hold MENU on the
remote commander, select [BT Setting]
remote commander, select [BT Setting]
[Pairing], then press ENTER.
The BLUETOOTH indicator on the unit flashes
(while the unit is in pairing standby mode).
(while the unit is in pairing standby mode).
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
4
Select [RSX-GS9] shown in the display of
the BLUETOOTH device.
the BLUETOOTH device.
If your model name does not appear, repeat
from step 2.
from step 2.
5
If passkey* input is required on the
BLUETOOTH device, input [0000].
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc., depending on
the device.
the device.
When paired, the BLUETOOTH indicator on the
unit stays lit.
unit stays lit.
6
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
to establish the BLUETOOTH connection.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To start playback
For details, see “Playing a BLUETOOTH Device”
(page 13).
(page 13).
To cancel pairing
Perform step 2 to cancel the pairing mode after this
unit and the BLUETOOTH device are paired.
unit and the BLUETOOTH device are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
required. Some paired devices will connect
automatically.
1
Press and hold MENU on the remote
commander, select [BT Setting]
commander, select [BT Setting]
[BT
Signal], then press ENTER.
Make sure the BLUETOOTH indicator on the unit
lights up.
lights up.
2
Activate the BLUETOOTH function on the
BLUETOOTH device.
BLUETOOTH device.
3
Operate the BLUETOOTH device to
connect to this unit.
connect to this unit.
To connect the last-connected device from
this unit
this unit
Activate the BLUETOOTH function on the
BLUETOOTH device.
Press SOURCE (SRC), then select [BT Phone]* or [BT
Audio].
Press ENTER to connect with the cellular phone, or
PAUSE to connect with the audio device.
BLUETOOTH device.
Press SOURCE (SRC), then select [BT Phone]* or [BT
Audio].
Press ENTER to connect with the cellular phone, or
PAUSE to connect with the audio device.
* Available only when the “SongPal” connection is
established.
Note
While streaming BLUETOOTH audio, you cannot
connect from this unit to the cellular phone. Connect
from the cellular phone to this unit instead.
While streaming BLUETOOTH audio, you cannot
connect from this unit to the cellular phone. Connect
from the cellular phone to this unit instead.
Tip
With BLUETOOTH signal on: when the ignition is turned
to on, this unit reconnects automatically to the last-
connected cellular phone.
With BLUETOOTH signal on: when the ignition is turned
to on, this unit reconnects automatically to the last-
connected cellular phone.
To install the microphone
For details, see “Installing the microphone”
(page 30).
(page 30).
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device
[0000]
Input passkey
Connecting with a paired BLUETOOTH
device
device