Инструкции Пользователя для Sony RSX-GS9

Скачать
Страница из 52
14
GB
To match the volume level of the BLUETOOTH 
device to other sources
Start playback of the BLUETOOTH audio device at a 
moderate volume, and set your usual listening 
volume on the unit.
Press and hold MENU, then select [BT Setting] 
 
[BTA Level] (page 18).
To apply the SBC codec only
Press and hold MENU on the remote commander, 
then set [Audio Codec] in [BT Setting] to [SBC] 
(page 18).
Searching and Playing Tracks
Use the remote commander to perform the 
following.
For the iPod, repeat play and shuffle play are not 
available.
1
During USB1 or USB2 playback, press REP 
or SHUF repeatedly to select the desired 
play mode.
Playback in the selected play mode may take 
time to start. 
Repeat play mode:
 [Repeat Track] plays the track repeatedly.
 [Repeat Album] plays tracks in the album 
(folder) repeatedly.
 [Repeat OFF] cancels repeat play.
Shuffle play mode:
 [Shuffle Device] plays all tracks in the “Music” 
folder in random order.
 [Shuffle OFF] cancels shuffle play.
Notes
 During repeat play, shuffle play mode cannot be 
selected. During shuffle play, only [Repeat Track] 
can be selected, and [Repeat Album] cannot be 
selected.
 [Shuffle Device] is only available when repeat play 
is off.
 When shuffle play is performed or canceled, 
playback starts from the first track in the “Music” 
folder.
 While shuffle play is performed with [Repeat 
Track] selected, pressing 
 will cancel [Repeat 
Track] and restart shuffle play from the first track 
in the “Music” folder.
 During shuffle play, the list display on “SongPal” is 
not available. To enable the list display, cancel 
shuffle play mode.
To use a cellular phone, connect it with this unit. For 
details, see “Preparing a BLUETOOTH Device” 
(page 9).
 Only while the “SongPal” connection is 
established, [BT Phone] becomes available when 
selecting the source.
Use the controls on the unit to perform the 
following.
Receiving a Call
1
Press any button when a call is received 
with a ringtone.
The phone call starts.
Note
The ringtone and talker’s voice are output only from the 
audio device connected to FRONT AUDIO OUT.
To reject the call
Press and hold the following button:
 any button other than SRC for 2 seconds.
 SRC for 1 to 2 seconds.
To end the call
Press SRC.
Making a Call
You can make a call via “SongPal” only. For details, 
see “SongPal with iPhone/Android smartphone” 
(page 15).
Available Operations during 
Call
To adjust the ringtone volume
Rotate the volume dial while receiving a call.
To adjust the talker’s voice volume
Rotate the volume dial during a call.
To adjust the volume for the other party (Mic 
gain adjustment)
Press 
 during a call.
Adjustable volume levels: [MIC High], [MIC Low], 
[MIC Middle].
Repeat play and shuffle play
Handsfree Calling (via BLUETOOTH 
only)