Инструкции Пользователя для Tascam DR-40
TASCAM DR-40
57
Recording 4 channels
You can use the built-in mics with connected external mics or
equipment to record four independent channels as two stereo
recording files (channels 1/2 and 3/4).
equipment to record four independent channels as two stereo
recording files (channels 1/2 and 3/4).
Making 4-channel recording settings
1 Press the REC MODE button to open the
REC MODE
screen.
2 Use the + and – buttons to select
REC MODE
, and press
the ENTER/MARK or / button.
3 Use the + and – buttons to set it to
4CH
.
4 Press the . button to return to setting item
selection.
5 When using MS mics, use the + and – buttons to select
MS DECODE
, and press the ENTER/MARK or / button.
Use the + and – buttons to set
MS DECODE
to
ON
.
6 Press the . button to return to setting item
selection.
7 Use the + and – buttons to select
DELAY
, and press the
ENTER/MARK or / button.
8 Use the + and – buttons to set the value according to
the distance between the built-in mics and external
mics.
Options:
Options:
INT 30ms (10m)
–
EXT 30ms (10m)
(default
value: 0ms (0m))
The values are in milliseconds (ms) and meters (m).
The values are in milliseconds (ms) and meters (m).
NOTE
If the built-in mics (channels 1/2) are far apart from the
•
external mics (channels 3/4), a time delay will occur in
recording. Use the
recording. Use the
DELAY
setting to eliminate this time
delay in recording.
If the sound source is closer to the built-in mics, use an
If the sound source is closer to the built-in mics, use an
•
INT
XXms (XXm)
setting according to the difference in distance
to the external mics.
If the sound source is closer to the external mics, use an
If the sound source is closer to the external mics, use an
•
EXT
XXms (XXm)
setting according to the distance to the built-
in mics.
9 When setting is complete, press the
(HOME) [8]
button to return to the Home Screen.
4 – Recording