Инструкции Пользователя для Tascam DR-40

1  Press the RECORD [0] button to begin recording 

Before you start recording you can confirm the recording 
audio file format and sampling frequency at the top of the 
recording screen, as well as the input sources on the left and 
the recording project name beneath the meter bars. 
2  Press the RECORD [0] button again to start recording. 

4-channel recording creates two files simultaneously. 
Two files – one for the built-in mics (channels 1/2) and one for 
the external mics or equipment (channels 3/4) – are created as 
a set. 

1

: Set with the 

WORD

 item on the 

FILE NAME

 screen

2

: Recording file base number

3

: “S” is the source file  

4

: Assigned channels (“12” is channels 1/2 and “34” is 

channels 3/4)

Overdubbing has two modes.
Using the overdubbing function, you can mix input signals 
with an audio file that is played back and record either the 
combined signals or just the input signal as a new file.

In OVERDUB mode, the pre-recording and auto-recording 

• 

functions are disabled. 
In OVERDUB mode, you cannot start new files manually.

• 

You cannot pause in OVERDUB mode. (You cannot use the 

• 

RECORD [0] button.)