Инструкции Пользователя для Kenwood KMR-D368BT

16

ENGLISH

Once pairing is completed, Bluetooth connection is 
established automatically.
• 

 / 

 : “BT1” and/or “BT2” indicator 

on the faceplate lights up.

• 

 / 

 : “BT1” and/or “BT2” on the 

display window lights up.

•  This unit supports Secure Simple Pairing (SSP).
•  Up to five devices can be registered (paired) in total.
•  Once the pairing is completed, the Bluetooth device will 

remain registered in the unit even if you reset the unit. 
To delete the paired device,   19, [DEVICE DELETE].

•  A maximum of two Bluetooth phones and one Bluetooth 

audio device can be connected at any time. 

  However, while in BT AUDIO source, you can connect to 

five Bluetooth audio devices and switch between these 
five devices. (  20)

•  Some Bluetooth devices may not automatically connect 

to the unit after pairing. Connect the device to the unit 
manually.

•  Refer to the instruction manual of the Bluetooth device 

for more information.

When you connect iPhone/iPod touch/Android device to 
the USB input terminal, pairing request (via Bluetooth) is 
automatically activated.

Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [AUTO PAIRING] is set to [ON]. (  19)
– KENWOOD MUSIC PLAY application is installed on the 

Android device (  8) and [BROWSE MODE] is selected (  9).

When there is an incoming call:
• 

 / 

 : ZONE 2 illuminates in green color and flashes.

•  The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (  17)

During a call:
• 

 / 

 : ZONE 1 illuminates according to the settings made for 

[DISPLAY] (  25) and ZONE 2 illuminates in green color.

•  If you turn off the unit or detach the faceplate, the Bluetooth connection is 

disconnected.

The following operations may differ or not available depending on the connected 
phone.

First incoming call...

JS_KWD_KDC_X301_KN_EN_4.indd   16

21/7/2016   11:40:41 AM