Инструкции Пользователя для Kenwood KMR-D368BT
ENGLISH
17
BLUETOOTH®
To
On the faceplate
On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
call and hold the current
call
Press
.
Press
.
Reject another incoming
call
call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
activate held call
Press
.
Press
.
Swap between the
current call and held call
current call and held call
Press
. Press
.
Adjust the phone volume
[00] to [35] (Default: [15])
[00] to [35] (Default: [15])
Turn the volume knob during
a call.
• This adjustment will not
a call.
• This adjustment will not
affect the volume of the other
sources.
sources.
( Not available )
Switch between hands-free
and private talk modes
and private talk modes
Press
during a call.
• Operations may vary
according to the connected
Bluetooth device.
Bluetooth device.
( Not available )
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then press the
knob.
knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default: XX
MIC GAIN
–10 to +10 (–4): The sensitivity of the microphone
increases as the number increased.
increases as the number increased.
NR LEVEL
–5 to +5 (0): Adjust the noise reduction level
until the least noise is being heard during a phone
conversation.
until the least noise is being heard during a phone
conversation.
ECHO CANCEL
–5 to +5 (0): Adjust the echo cancellation delay
time until the least echo is being heard during a
phone conversation.
time until the least echo is being heard during a
phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
following table), then press the knob.
3
Repeat step
2
until the desired item is selected or
activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default: XX
SETTINGS
AUTO ANSWER
1 to 30: The unit answers incoming call automatically
in the selected time (in seconds). ; OFF: Cancels.
in the selected time (in seconds). ; OFF: Cancels.
BATT/SIGNAL*
(For
/
)
AUTO: Shows the strength of the battery and signal
when the unit detects a Bluetooth device and the
Bluetooth device is connected. ; OFF: Cancels. Clock
time is shown.
when the unit detects a Bluetooth device and the
Bluetooth device is connected. ; OFF: Cancels. Clock
time is shown.
* Functionality depends on the type of the phone used.
JS_KWD_KDC_X301_KN_EN_4.indd 17
21/7/2016 11:40:41 AM