Инструкции Пользователя для ONKYO PR-RZ5100

Troubleshooting | Appendix

4.  Connect the USB storage device to the USB port of the 

unit.

•  If you connect a USB hard disk drive to the USB 

port of the unit, we recommend that you use its AC 

adapter to power it.

•  If the USB storage device has been partitioned, 

each section will be treated as an independent 

device.

5.  Press   on the remote controller.

The Setup menu is displayed on the TV screen.

Setup

1. Input/Output Assign 
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous

1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input

6.  Select "7. Miscellaneous" - "Firmware Update" - 

"Update via USB" with the cursors in order, then press 

ENTER.

Setup

1. Input/Output Assign 
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone

7. Miscellaneous

1. Tuner
2. Remote ID
3. Preamp Mode

4. Firmware Update

5. Initial Setup
6. Lock

Setup

1. Input/Output Assign 
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone

7. Miscellaneous

1. Tuner
2. Remote ID

3. Firmware Update

4. Initial Setup
5. Lock

•  If "Firmware Update" is grayed out and cannot be 

selected, wait for a while until it starts up.

•  You will not be able to select "Update via USB" if 

there is nothing to update.

7.  Press ENTER with "Update" selected to start update.

•  During the update, the TV screen may go black 

depending on the updated program. In that case, 

check the progress on the display of the unit. The 

TV screen will remain black until the update is 

complete and the power is turned on again.

•  During the update, do not turn off, or disconnect 

then reconnect the USB storage device.

•  "Completed!" is displayed when the update is 

complete.

8.  Disconnect the USB storage device from the unit.
9.  Press  ON/STANDBY on the main unit to turn the unit 

into standby mode. The process is completed and your 

firmware is updated to the latest version.

•  Do not use   on the remote controller.

■ If an Error Message is Displayed

When an error occurs, "＊-＊＊ Error!" is displayed on 

the display of the unit. ("＊" represents an alphanumeric 

character.) Check the following:
Error Code

•  ＊-01, ＊-10：

USB storage device not found. Check whether the USB 

storage device or USB cable is correctly inserted to the 

USB port of the unit.

Connect the USB storage device to an external power 

source if it has its own power supply.

•  ＊-05, ＊-13, ＊-20, ＊-21：

The firmware file is not present in the root folder of the 

USB storage device, or the firmware file is for another 

model. Retry from the download of the firmware file.

Disconnect then reconnect the AC power cord, then 

repeat from the beginning.