Справочник Пользователя для Intertex Data AB IX78
- 9 -
To access the built-in network configuration pages of the ADSL Internet Gate, do the following:
1. Start a web browser, such as Internet Explorer or Netscape Navigator, on your PC.
2. Write the IP address of your ADSL Internet Gate, 192.168.0.1, in the address field of the
browser. The first web configuration page should appear.
3. Click
Log in.
4. Enter
User name and Password. (At delivery: User name=admin, Password=admin. You
should change the password!)
4.1 Network
Settings
You can edit the network settings by choosing Network under Configurations on the menu page.
Select access type DHCP, PPPoE or PPPoA depending on the type of connection you have received
from your Internet provider. If you are not sure what to select choose Auto and click Search. If you
have received a user name and password from your Internet provider enter those before you click
Search. To configure the line parameters manually select access type Manual.
from your Internet provider. If you are not sure what to select choose Auto and click Search. If you
have received a user name and password from your Internet provider enter those before you click
Search. To configure the line parameters manually select access type Manual.
Note:
Each of the interfaces ET1-3, ET4, USB and AIR must reside on separate subnets. Two interfaces cannot
have the same IP address – even if one of them is blocked!
Each of the interfaces ET1-3, ET4, USB and AIR must reside on separate subnets. Two interfaces cannot
have the same IP address – even if one of them is blocked!
These fields are filled
automatically if “Access
type Auto” is selected.
automatically if “Access
type Auto” is selected.
How do I configure the
LAN connections? Refer
to 3.2, 3.2.1, and 3.2.2!
LAN connections? Refer
to 3.2, 3.2.1, and 3.2.2!
Do not forget to click Apply and
then the link at the top of the page
to save the settings permanently!
then the link at the top of the page
to save the settings permanently!