Справочник Пользователя для Intertex Data AB IX78

- 8 - 

 

 

 

 

No Ethernet packets at all received. This may be OK, but check your settings, see 3.2 and 
3.4. 

If no error messages are shown, then your Internet connection is OK. Any remaining error is probably 
due to your PC’s settings. See 3.2 for more information! 

If you wish to you can reset all settings to their original values, so your ADSL Internet Gate is set up 
the same way as when delivered from the factory. 

1.  Press and hold   SET   pressed for 3 seconds, to enter setup mode. 

 

 

 

2. Press 

 SEL   repeatedly until ”RST” appears in the display. 

 

 

 

3. Press 

 SET  . 

 

4.  The question ”Clear all?” appears, and then ”no”. 

 

5. Press 

 SEL   to choose ”YES”. 

 

 

6. Press 

 SET  . 

 

7.  The ADSL Internet Gate now resets and then restarts. 

 

 

Your ADSL Internet Gate is delivered with factory settings that fit most users. In some situations 
however, you need to change the configuration of your ADSL Internet Gate. All the configuration 
pages can be reached from the main menu in the ADSL Internet Gate. You can also easily set up the 
ADSL Internet Gate to fit your specific needs. 

In the following sections you will find information about two of the configurable features in the ADSL 
Internet Gate. For more information refer to the built in help or the online user manual, see also 
section 2. 

Note: 
When you have made changes in the GUI, click Apply to activate the settings. To save the settings 
permanently click on Save permanently at the top of the page. Changes that are not permanently 
saved will disappear if the unit is restarted. When there are changes that have not been saved 
permanently a warning is displayed at the top of the page as well as the text CFG in the display.