Справочник Пользователя для Exegin Technologies Limited Q53R6
62
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2013
9. Reference Information
Q53 Command Line Interface Shell
Q53 Command Line Interface Shell
9
R
EFERENCE
I
NFORMATION
This chapter describes some of the most common features of the Q53 including:
•
on page 62: a description of the built-in
command line interface shell, along with a table of the most common commands
•
on page 64: syntax and descriptions of all
commands available in the command line interface shell
•
on page 70: important predefined names
•
on page 70: logging in as a "root" or "guest" user
•
on page 70: how to reset the unit to factory default
settings
•
on page 71: a complete overview of the Flash
upgrade procedure.
Q53 Command Line Interface Shell
Within the Q53, the command line interface shell is built into the firmware. It allows you
to manipulate objects such as sntp, and sysinfo and also provides some monitoring and
troubleshooting capabilities.
to manipulate objects such as sntp, and sysinfo and also provides some monitoring and
troubleshooting capabilities.
Command Line Interface access methods
Access the command line interface shell using these methods:
HTML Forms
When you configure a setting using the built-in HTML
configuration forms, shell commands are actually
executed remotely on the Q53.
configuration forms, shell commands are actually
executed remotely on the Q53.
Telnet Session
Opening a Telnet session with the Q53 allows you to
log into the device and access the command line
interface shell. (e.g. "
log into the device and access the command line
interface shell. (e.g. "
telnet 192.168.11.9
")