Справочник Пользователя для Cypress Semiconductor 3025

Document Number: 002-xxxxx Rev. ** 

Page 33 of 42

This Cypress BLE module is produced in compliance with the Restriction of Hazardous Substances (RoHS) and Halogen-Free (HF)

directives. The Cypress module and components used to produce this module are RoHS and HF compliant.

The CYBLE-0130XX-00 module will be certified under the following RF certification standards at production release.

n

FCC: WAP3025

n

CE

n

IC: 7922A-3025

n

MIC: TBD

The CYBLE-0130XX-00 module complies with the following safety regulations:

n

Underwriters Laboratories, Inc. (UL): Filing E331901

n

CSA

n

TUV

 describes the operating and storage conditions for the Cypress BLE module.

Exposed components require special attention to ESD and electromagnetic interference (EMI).
A grounded conductive layer inside the device enclosure is suggested for EMI and ESD performance. Any openings in the enclosure

near the module should be surrounded by a grounded conductive layer to provide ESD protection and a low-impedance path to ground. 
Device Handling: Proper ESD protocol must be followed in manufacturing to ensure component reliability.

Operating temperature

−30 °C

85 °C

Operating humidity (relative, non-condensation)

5%

85%

Thermal ramp rate

–

3 °C/minute

Storage temperature

–40 °C

85 °C

Storage temperature and humidity

–

85 °C at 85%

ESD: Module integrated into system Components

[6]

–

15 kV Air

2.0 kV Contact

6. This does not apply to the RF pins (ANT).