Справочник Пользователя для Essence Security International ltd. ES800MGL
Installing WeR@Home™
16
WeR@Home™ Installation Guide
4. If the camera detector is not included in the WeR@Home
™
kit, pair the camera detector as
5. Gently shake the device.
6. Insert three AA alkaline batteries, observing the correct polarity.
Figure 16 – Battery Insertion
The LED in the lens compartment flashes red, indicating that the camera detector has powered up
successfully.
successfully.
7. When prompted, enter a name and/or location for the device and tap OK. The camera detector
appears in the list on the Devices screen.
8. Clean and dry the mounting location surface.
9. Peel off the mounting-tape protective strips, according to the chosen location:
On a flat wall
In a corner
Figure 17: Mounting Tape Protective Strips
10. Press the mounting-base into place.
11. If you have a pet on the premises, install a pet immune lens. Refer to Appendix E Installing a Pet
For installing in
a corner
a corner
For installing on
a flat wall
a flat wall