Справочник Пользователя для Landis+Gyr Technology Inc. ER6R1S4
Draft
Landis+Gyr
Chapter 4 - Deploying Endpoints
User Guide
98-1723 Rev AB
27
•
If the endpoint configuration sent in with the Init Push is not recognized, Command Center
will transition it to Configure.
will transition it to Configure.
•
A Reconfiguration command will be sent from Command Center to set the endpoint
configuration group. (If the meter is ZigBee enabled, a HAN Initialization command will be
sent, also setting it to Configure.)
configuration group. (If the meter is ZigBee enabled, a HAN Initialization command will be
sent, also setting it to Configure.)
•
A response to the reconfiguration command (or HAN Initialization) will transition the
endpoint to Normal in Command Center.
endpoint to Normal in Command Center.
Monitoring the Dashboard
The Dashboard provides notification of system events and the status of system processes in a timely
manner without user interaction. The dashboard should be monitored by the administrator on a regu-
lar basis, throughout the day.
manner without user interaction. The dashboard should be monitored by the administrator on a regu-
lar basis, throughout the day.
Click Network > AMI Dashboard. The dashboard will open.
The dashboard will show filtering options depending on the technologies that the utility is licensed
for. Selecting the filtering tabs will display just the devices associated with that technology.
for. Selecting the filtering tabs will display just the devices associated with that technology.
•
ALL. Select All to display every endpoint in the system.
•
RF. Select RF to display only RF endpoints in the system.
•
Cellular. Select Cellular to display only Cellular endpoints in the system.
Figure 4 - 7. AMI Dashboard - Cellular Tab