Справочник Пользователя для Qiaoxing Telecom Industry Co. Ltd. GH9460-GH9620

HANDSET

After the battery is installed, the handset LCD will display “PLS REGIST.” put the handset onto the 
charge cradle and seat in the cradle for minimum of 6 seconds for master base to complete the 
charge ID code exchange and handset registration process. Confirmation beep for notifies the 
success of the registration. After registration I s complete the LCD display change to Idle mode 
display” RING:HI, HS# , Date/Time, CH#” … etc.   

If 3 error beeps is appear which means the charge and registration is not completed user may lift the 
handset and put the handset back to cradle again unit the single beep confirmation tone is appear.   

Warning label to be put on that handset.  “The handset charge on the master base will be 
automatically registered.    Place the extra handset from the small charger base to the master base 
charge cradle.”    “Wait minimum o f 6 seconds before removing the handset.” 

If a total empty battery is installed the first time, put the handset on to the cradle and charge for 12 
hrs or until the battery low ICON is disappear, when battery low ICON is disappear the handset will 
show lift the handset, until the user lift the handset, the display will show “PLS REGIST.” user will 
follow the register process to complete the registration process.     

Press 

 button to confirm that you have 

a dial tone. If you do not get a dial tone, review 
step 3 through 11.  If you still do not have a 
dial tone, refer to the Problem solving section.   

With the back of the HANDSET  facing up, 
insert one side of the BELT CLIP HOOK into 
the matching slot at the top side of the 
HANDSET. Press down on the opposite side 
of the BELT CLIP until the other HOOK locks 
into the slot on the side of the HANDSET.

13.  Set the date and time on the HANDSET   

talk

ANTENNA