Справочник Пользователя для Therm-Omega-Tech Inc. 94030
6.STANDARD USER MENU
The screens are shown in the order they appear as the scroll key is pressed. When the
battery power screen is reached and the scroll key is pressed again the menu system will
loop around to the selected main screen.
If the unit is left showing any screen for more than 10 seconds it will revert to the
selected Main Screen.
battery power screen is reached and the scroll key is pressed again the menu system will
loop around to the selected main screen.
If the unit is left showing any screen for more than 10 seconds it will revert to the
selected Main Screen.
6.1.Main Screen Selection
When the ProCom 4 is turned on the standard main screen appears. Pressing the up or
down key scrolls through a selection of three main screens.
down key scrolls through a selection of three main screens.
6.1.1.Standard Main Screen
The * shows when the fan is running. The numbers to the right are the actual Pit and
Meat thermocouple temperatures.
Meat thermocouple temperatures.
P I T
*
2 7 3
M E A T 1 8 0
From the standard main screen, if the up key is hit the setpoint screen is shown.
6.1.2.Setpoint Main Screen
The actual values are to the left and the setpoints are to the right.
P 2 7 3 2 7 5
M
M
1 8 0 1 8 5
If the up key is hit again Shot Gun Fred’s Screen is shown.
6.1.3.Shot Gun Fred’s Main Screen
This screen was designed for the advanced user and shows you the Pit Temp, Meat
Temp, Cook Timer, Fan Status, and Fan %.
“R” is shown when the control is actively ramping.
“r” is shown when ramp is enabled but not active.
% Fan shows 0-9 and F for fan running full time.
Temp, Cook Timer, Fan Status, and Fan %.
“R” is shown when the control is actively ramping.
“r” is shown when ramp is enabled but not active.
% Fan shows 0-9 and F for fan running full time.
P 2 7 3 M 1 8 0
0 0 : 0 0 R * 5
0 0 : 0 0 R * 5
If the up key is hit again the standard main screen appears again.
6.1.4.Temperature Display Messages
When the controller is out of range or interference is present the display will show screen
below and then flash “MEAT TEMP UNKNOWN !”:
below and then flash “MEAT TEMP UNKNOWN !”:
P I T
*
- - -