Справочник Пользователя для Sansun Industrial Limited SN-222
Date: 2004 / 11 / 12
SN-222
4 /3
Edition: 1
Signed by:
Approved by:
successfully, if not, please do the above steps again.
Caution: If you had changed the security ID successfully, you need to do above steps to re-connect the mouse
and the receiver each time you place batteries.
and the receiver each time you place batteries.
Troubleshooting
Try one or more of the following:
For optimal performance, place the receiver at least eight inches or 20 centimetres away from electrical
devices, such as the computer, the computer monitor, or other electrical external divices.
Make sure you have installed the battery correctly.
If you are working on a metallic surface, try using a mouse pad and turning the receiver on its side for
If you are working on a metallic surface, try using a mouse pad and turning the receiver on its side for
better reception.
Set the security Ids. Please set as following the steps that mentioned in Changing the Security Ids.
Mouse Not Detected
When using the mouse, the computer may not detect it. To remedy this problem, try the following:
When using the mouse, the computer may not detect it. To remedy this problem, try the following:
Make sure the receiver cable is plugged into the right mouse port.
Make sure your mouse port has the proper configuration. Refer to your computer documentation for the
Make sure your mouse port has the proper configuration. Refer to your computer documentation for the
correct port configuration.
The Screen Cursors Does Not Move Properly
Change the position of your radio receiver, because it may be too far from the mouse or a large metal object
may be interfering with the receiver’s radio reception. Try moving the stand and / or mouse to improve
reception.
Can’t charge the battery
Make sure place the mouse on the stand properly.
If your tabletop surface is highly reflective like a mirror or is not smooth, your tabletop surface will interfere
the optical sensor of the mouse. Try using a mouse pad, or use the mouse on a different tabletop surface.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance will
void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant.
void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant.