Справочник Пользователя для myon AG M320-1
Power supplies other than those shipped with the myon320 system must not be
used.
used.
3.2
3.2
3.2
3.2 Transmitter
Transmitter
Transmitter
Transmitter
Image 5: Transmitter
•
Channel number
•
LED function indicator
•
Charging contacts
•
Reset switch
3.2.1
Reset switch
In case the transmitter doesn't start transmitting or should stop operation, first check that the
transmitter is fully charged. Re-insert the transmitter into a charging slot for a few seconds and try
again.
transmitter is fully charged. Re-insert the transmitter into a charging slot for a few seconds and try
again.
If this doesn't help, resetting of the device may be required.
A reset must not be carried out without prior advice by the myon-prophysics support
team.
team.
To perform a hard-reset carefully insert the tip of a ballpen into the opening on the side of the
transmitter housing and gently press and hold down the reset micro switch for about 5 seconds. The
transmitter should restart itself and begin operation immediately. Please make sure that the
transmitter has enough battery capacity left to start operation.
transmitter housing and gently press and hold down the reset micro switch for about 5 seconds. The
transmitter should restart itself and begin operation immediately. Please make sure that the
transmitter has enough battery capacity left to start operation.
Date: 03.06.2013
LaInMa-EU-m320 - Instructions manual (full version, english) - 20130603 - V1.7.odt
Page 12 of 32
V
E
R
S
IO
N
1
.7
/
0
3.
0
6
.2
0
13