Справочник Пользователя для TP-Link Technologies Co. Ltd. TDW8151NV4

 

 

43

is the same for all stations in your wireless network. Type the desired SSID in the space 
provided. 

 

Authentication Type: Select an authentication type from the drop-down list, which 
allows you to configure security features of the wireless LAN interface. Options available 
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ 
WPA2-PSK. 



  WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router 

can bridge two or more WLANs. 

 

MAC Address: Enter the MAC Address you wish to bridge in the field. 



  Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses 

of the wireless devices transmitting within your network’s RADIUS.   

 

Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for 
don’t. 

 

Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny 
Association” the follow Wireless LAN station(s) association. 

 

MAC Address: Enter the MAC Address you wish to filter in the field. 

IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services and 
to allow isolated IPv6 hosts and networks to reach each-other over IPv4-only infrastructure before 
IPv6 completely supplants IPv4. It is a temporary solution for networks that do not support native 
dual-stack, where both IPv6 and IPv4 run independently. 

As a type of IPv6 tunnel, 6RD is used in the situation that your WAN connection is IPv4 while LAN 
connection is IPv6. Choose “Interface Setup→Wireless” menu,and you will see the screen as 
shown in Figure 4-28. 

 

Figure 4-28 



  6rd IPv6 Prefix: The prefix of the 6RD tunnel. 



  IPv4 Mask Length: The length of the IPv4 mask. 



  6RD Border Relay IPv4 Address: The IPv4 address of the border relay router of 6RD tunnel. 



  Use PVC: Select the PVC from the the drop-down list.