Справочник Пользователя для Impinj Inc. XARRAY
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 2: Installing and Connecting
Chapter 2: Installing and Connecting
16
Revision 4.11 Copyright ©2014, Impinj, Inc.
2. Log in to the Reader;
user name: root
password: impinj
password: impinj
3. Select one of the available regions from the drop down list, see figure 2.8
Note
: if you do not see your country or region listed, contact Impinj regarding
current regulatory approval status.
4.
Click the REBOOT button. When changing the Reader's operating region, the effect
of the change does not take effect until the next reboot. Attempting RFID operations
on the Reader after changing the region but before rebooting will result in undefined
behavior.
of the change does not take effect until the next reboot. Attempting RFID operations
on the Reader after changing the region but before rebooting will result in undefined
behavior.
Figure 2.8 Change Regulatory Region Web Interface
Alternately, the following RShell commands will set or change a GX1 or GX2 region of
operation:
show system region
– shows the configured region and list of selectable regions.
config system region X
– set the region to region number X, example config
system region 15, sets region on GX1 to Singapore.
Step 6: Test the Installed Reader
Confirm connections and functionality is correct by reading tags. Using the MultiReader, a
Windows PC test application from Impinj, you can quickly verify Reader operation by
configuring various Reader parameters and running simple inventory operations. For details
about how to access and
Windows PC test application from Impinj, you can quickly verify Reader operation by
configuring various Reader parameters and running simple inventory operations. For details
about how to access and