Справочник Пользователя для Datastrip Inc. DSV2SC01
DSV2+
Turbo
User Manual, Version 1.09
41
Copyright © 2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
15. Appendix A: Docking Station
The connector in the bottom endcap of the pins DSV2+
Turbo
provide external power and one
serial port for interfacing to a host computer or other external equipment via the Datastrip
Docking Station.
Docking Station.
15.1.1 Adjusting the Docking Station Backrest
The docking station backrest has two positions. It is important to adjust the backrest correctly to
insure proper operation (i.e. serial connection) between the DSV2+ and the docking cradle.
The docking station backrest has two positions. It is important to adjust the backrest correctly to
insure proper operation (i.e. serial connection) between the DSV2+ and the docking cradle.
Forward Position: This position should be used for DSV2+
Turbo
Scanners or DSV2+
Turbo
-SC
terminals with the standard battery cover. See Figures #1 and #2.
Rear Position: This position should be used for DSV2+
Turbo
Scanners or DSV2+
Turbo
-SC terminals
with a Dual Grip Battery Cover, or a Dual Grip Camera Assembly. See Figures #3 & #4.
Figure #1–DSV2+ Scanner Figure #2 – DSV2+ SC Figure #3 – Dual Grip Figure #4 – DG Camera
15.1.2 Dual Grip Tethered Stylus
When not in use it is recommended that the Dual Grip tethered stylus cable be stored out of the
way by looping it around the dual grip rubber grips as shown in Figures # 5 and #6.
When not in use it is recommended that the Dual Grip tethered stylus cable be stored out of the
way by looping it around the dual grip rubber grips as shown in Figures # 5 and #6.
Figure #5
Figure #6