Справочник Пользователя для Outsite Networks Inc. APT-2014
AllPoints Touch Installation Manual
Page 8
10.1 VeriFone Ruby/Verifone Topaz DDM Instructions
1. Disconnect the journal or receipt printer cable from the back of the POS. This is
usually a Cat 5 cable with an RJ45 connector.
2. Connect this cable into the port marked Print 4 of the DDM.
3. Connect the provided 2’ Cat5 cable into the printer port of the POS.
4. The other end of the 2’ Cat5 cable connects to the port marked Print 5 on the DDM.
5. Disconnect the Barcode Scanner cable from the back of the POS. This is usually a
3. Connect the provided 2’ Cat5 cable into the printer port of the POS.
4. The other end of the 2’ Cat5 cable connects to the port marked Print 5 on the DDM.
5. Disconnect the Barcode Scanner cable from the back of the POS. This is usually a
Cat5 cable with an RJ45 connector. Connect this cable into the port marked Scan 1
of the DDM.
of the DDM.
6. Connect the provided 2’ Cat5 cable into the scanner port of the POS.
7. The other end of the 2’ Cat5 cable connects to the port marked Scan 2 on the Serial
7. The other end of the 2’ Cat5 cable connects to the port marked Scan 2 on the Serial
DM.
8. Connect the provided 14’ Cat5 cable from the port marked Server of the DDM to the
Serial Port 3 (port closest to POWER) connection on the back of the AP Touch.
Part Numbers and Descriptions for VeriFone Ruby or Topaz:
AIS02000
DDM-VF
BPRES0002
Data Cable 2’ CAT5
BPRES0005
Data Cable 7’ CAT5
10.2 TDL NCR RealPOS 7402 Instructions
1. Disconnect the DVR/Security Interface cable from the front of the POS. This is
usually a serial cable with a DB9 connector.
2. Connect the provided DB9 Female to RJ45 cable to the DB9 removed from the
DVR/Security Interface port in Step 1.
3. Connect this cable into the port marked Print 4 of the DDM.
4. Connect the provided 2’ DB9 Male to RJ45 cable into the DVR/Security Interface
4. Connect the provided 2’ DB9 Male to RJ45 cable into the DVR/Security Interface
port of the POS.
5. The other end of the 2’ Cat5 cable connects to the port marked Print 5 on the DDM.
6. Disconnect the Barcode Scanner cable from the back of the POS. This is usually a
6. Disconnect the Barcode Scanner cable from the back of the POS. This is usually a
DB9 Male cable.
7. Connect the provided DB9 Female to RJ45 cable to the DB9 of the scanner.
8. Connect this cable into the port marked Scan 1 of the DDM.
9. Connect the provided DB9 Male to RJ45 cable into the scanner port of the POS.
10. The other end of the cable connects to the port marked Scan 2 on the Serial DM.
11. Connect the provided 14’ Cat5 cable from the port marked Server of the DDM to the
8. Connect this cable into the port marked Scan 1 of the DDM.
9. Connect the provided DB9 Male to RJ45 cable into the scanner port of the POS.
10. The other end of the cable connects to the port marked Scan 2 on the Serial DM.
11. Connect the provided 14’ Cat5 cable from the port marked Server of the DDM to the
Serial Port 3 (port closest to POWER) connection on the back of the AP Touch.
NOTE: The DDM Server connection must be made to Serial Port 3. The DDM will not
properly function connected to Serial Port 1 or Serial Port 2