Справочник Пользователя для Instrumentarium Dental PaloDEx Group Oy SM
5 General information
200150 rev 3
Instrumentarium Dental
31
– lead (Pb): sensor, circuit board
The locations of all the spare and replacement parts and assemblies
listed above can be found in the service and/or installation manual
supplied with the device.
listed above can be found in the service and/or installation manual
supplied with the device.
5.6
W
ARNINGS
•
Minimize the number of running programs before image capturing
to ensure the necessary operating system resources for the
process.
to ensure the necessary operating system resources for the
process.
•
Computer should only be connected to grounded outlet
•
Do not forcefully bend sensor cables. Avoid mechanical wear and
stress (pulling the cable)
stress (pulling the cable)
•
Use only the power supply specified by the manufacturer
•
Make sure that the Ready LED illuminates before making an
exposure.
exposure.
•
Don't sterilize the sensor using autoclave or UV oven
•
Use a disposable hygienic cover or disinfect the sensor after
every patient
every patient
•
The battery is harmful to the environment and so it must be
disposed of in accordance with local regulations.
disposed of in accordance with local regulations.
•
The electronics box must not be opened or repaired by the user
•
Do not allow water or other cleaning liquids to enter the
electronics
electronics
•
Connect the system only to a PC conforming with IEC60950 or
IEC60601-1
IEC60601-1
5.7
N
OTICE
OF
WIRELESS
LAN
USAGE
WLAN operation is based on emitting and receiving RF energy.
This equipment complies with European R & TTE directives, and may
be operated without a licence in Europe (ETSI). The declaration of
conformity can be consulted at Instrumentarium Dental. Although this
and other use environment devices comply with CISPR requirements
for RF emissions, interference may still occur.
be operated without a licence in Europe (ETSI). The declaration of
conformity can be consulted at Instrumentarium Dental. Although this
and other use environment devices comply with CISPR requirements
for RF emissions, interference may still occur.
Monitor the performance of the wireless link. If it behaves in a strange
or unexpected way that may endanger patient safety, use the USB
connecting cable until the problem is resolved.
or unexpected way that may endanger patient safety, use the USB
connecting cable until the problem is resolved.
Hereby, Instrumentarium Dental, declares that this Sigma M -
sensor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
sensor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
5 General information
200150 rev 3
Instrumentarium Dental
31
– lead (Pb): sensor, circuit board
The locations of all the spare and replacement parts and assemblies
listed above can be found in the service and/or installation manual
supplied with the device.
listed above can be found in the service and/or installation manual
supplied with the device.
5.6
W
ARNINGS
•
Minimize the number of running programs before image capturing
to ensure the necessary operating system resources for the
process.
to ensure the necessary operating system resources for the
process.
•
Computer should only be connected to grounded outlet
•
Do not forcefully bend sensor cables. Avoid mechanical wear and
stress (pulling the cable)
stress (pulling the cable)
•
Use only the power supply specified by the manufacturer
•
Make sure that the Ready LED illuminates before making an
exposure.
exposure.
•
Don't sterilize the sensor using autoclave or UV oven
•
Use a disposable hygienic cover or disinfect the sensor after
every patient
every patient
•
The battery is harmful to the environment and so it must be
disposed of in accordance with local regulations.
disposed of in accordance with local regulations.
•
The electronics box must not be opened or repaired by the user
•
Do not allow water or other cleaning liquids to enter the
electronics
electronics
•
Connect the system only to a PC conforming with IEC60950 or
IEC60601-1
IEC60601-1
5.7
N
OTICE
OF
WIRELESS
LAN
USAGE
WLAN operation is based on emitting and receiving RF energy.
This equipment complies with European R & TTE directives, and may
be operated without a licence in Europe (ETSI). The declaration of
conformity can be consulted at Instrumentarium Dental. Although this
and other use environment devices comply with CISPR requirements
for RF emissions, interference may still occur.
be operated without a licence in Europe (ETSI). The declaration of
conformity can be consulted at Instrumentarium Dental. Although this
and other use environment devices comply with CISPR requirements
for RF emissions, interference may still occur.
Monitor the performance of the wireless link. If it behaves in a strange
or unexpected way that may endanger patient safety, use the USB
connecting cable until the problem is resolved.
or unexpected way that may endanger patient safety, use the USB
connecting cable until the problem is resolved.
Hereby, Instrumentarium Dental, declares that this Sigma M -
sensor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
sensor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Approved
Reviewed: Anttila Mika Johannes 02.05.07 09:54:49
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31