Справочник Пользователя для Interepoch Technology Inc. IWE3000T

 

6. Choose 

TFTP as the Firmware management protocol. 

7. Within 

the 

Configuration Backup/Restore section, specify the IP address of the computer, 

which acts as a TFTP server. If you don’t know the IP address of the computer, open a Com-
mand Prompt, and type IpConfig, then press the Enter key. 

8. 

Trigger the restoring process by clicking Restore. The DRBAP will then download the configu-
ration backup file from the TFTP server. 

Make sure the file is a valid configuration backup file for the DRBAP. 

If you want to remotely back up or restore configuration from the Internet, adjust the Timeout 

and Max no. of retries settings of TFTP Server for remote TFTP configuration backup/restore to suc-
ceed. 

 

Fig. 38. Configuration reset. 

Clicking the Reset button resets the device configuration to factory defaults. 

Think twice before clicking the Reset button. You’ll lose all your current configuration 

settings. 

 

Fig. 39. TCP/IP settings. 

The IP address of the DRBAP can be manually set (Set Manually) or automatically assigned by a 
DHCP server on the LAN (Obtain from a DHCP Server). If you are manually setting the IP ad-
dress, Subnet mask, and Default gateway settings, set them appropriately, so that they comply with 
your LAN environment. In addition, you can specify the Host name and Domain (DNS suffix) of the 
DRBAP. 

 

26