Справочник Пользователя для Interepoch Technology Inc. IWE3000T

 

signed the same IP address. 

1. 

Specify the MAC address of the DHCP client and the IP address to be assigned to it. Then, give 
a description for this mapping. 

2. 

Select the corresponding Enabled check box. 

An AP interface needs the Basic communication settings, and a LAN-to-LAN bridge interface needs 
the Basic communication settings and the Bridge Links settings. 

Basic IEEE 802.11g-related communication settings include Policy (RF type), Regulatory domain, 
Channel number, Network name (SSID), Data rate, and Transmit power. 

 

Fig. 42. Basic IEEE 802.11g communication settings. 

The RF type (Policy) of the WLAN interface can be configured to work in IEEE 802.11b only (b 
Only), IEEE 802.11g only (g Only), or mixed mode (Mixed—802.11g and 802.11b simultaneously). 

The number of available RF channels depends on local regulations; therefore you have to choose an 
appropriate regulatory domain to comply with local regulations. For two wireless devices to com-
municate with each other, they must be set to identical SSID (Service Set IDentifier). 

If there is RF interference, you may want to reduce the Data rate for more reliable wireless transmis-
sion. In most cases, leave the setting to Auto. 

The transmit power of the RF module of the DRBAP can be adjusted so that the RF coverage of the 
DRBAP can be changed. 

A bridge link is an IEEE 802.11 WDS (Wireless Distribution System) link. A LAN-to-LAN bridge 
interface is equipped with 6 WDS links so it can be connected to at most 6 other wireless bridges. 

 

28