Справочник Пользователя для Pico Communications PNAP-1A
Step 15: Advanced features – Monitoring
Click on the Monitor link on left menu column and you will see this:
At this time, Monitoring has not been enabled yet.
Step 16: Advanced features – Upgrading Firmware
Click on the Firmware link on the left menu column and you will see this:
Enter in the FTP username, password, IP address and file path information supplied to you from Pico
for this upgrade. Click the Upgrade button – then hit the save and reboot button. When it has
for this upgrade. Click the Upgrade button – then hit the save and reboot button. When it has
finished rebooting, the new firmware will have been installed and running. At this time, the safety net
of saving the original firmware into a secondary location has not been enabled yet. If you find that
after loading new firmware, you cannot boot the AP, contact your support person on how to restore
after loading new firmware, you cannot boot the AP, contact your support person on how to restore
the original version of firmware.