Справочник Пользователя для Pico Communications PNAP-1A
The Status Tab
Click on the Status tab to see this:
This page reports all the critical settings for the PicoBlue such as its internal and external IP address,
BT ID address, and MAC address.
The Help Tab
Help documentation will be provided as embedded HTML pages within the PicoBlue. At this time this
content is not available yet.
Troubleshooting
<Coming soon>
Notes
At this point in time, there are a few items that have been disabled or are not implemented yet:
- The top 2 connector ports have been disabled for now
- The DHCP client in the AP only grabs an IP address at this time. Gateway and DNS info still
- The DHCP client in the AP only grabs an IP address at this time. Gateway and DNS info still
need to be entered manually
- Many of the configurable parameters, as mentioned in the installation steps, have not been
enabled yet
What the LEDs mean
-
LED1: RF Link: Lit solid green when there is at least 1 Active Bluetooth client. Lit solid amber
when the maximum number of Bluetooth Clients has been reached.
when the maximum number of Bluetooth Clients has been reached.
-
LED2: RF Activity: Blinks green when there is RF activity for any one of the Bluetooth clients.
-
LED3: Network Link: Lit solid green when connected to a 100Mbit LAN or solid amber when
connected to a 10Mbit LAN.
connected to a 10Mbit LAN.