Справочник Пользователя для Spectralink Corporation WRFP4-2G4
We recommend you to use the instructions in
point A.
point A.
A.
To install a Repeater you will need a configuration
programme, the Repeater programming kit and
documentation of how to connect the cables.
To install a Repeater you will need a configuration
programme, the Repeater programming kit and
documentation of how to connect the cables.
You will find this description at your dealer.
Download of the programme and documentation is
free of charge.
Download of the programme and documentation is
free of charge.
The documentation and programme may also be
requested from your dealer.
requested from your dealer.
Pull the wire from the power supply through the wall
holder and then mount the wall holder on the wall.
Connect the wire to the plug on the backside of the
WRFP and "click" the WRFP on the wall holder.
holder and then mount the wall holder on the wall.
Connect the wire to the plug on the backside of the
WRFP and "click" the WRFP on the wall holder.
If you need to remove the Repeater please separate
it from the wall holder with a gentle push of a
screwdriver.
it from the wall holder with a gentle push of a
screwdriver.
For further information and technical support please
also refer to your dealer.
also refer to your dealer.
Reapeter 1405 7301 ed1 28/09/01 11:41 Page 2