Справочник Пользователя для Microsoft Corporation AD-5B
G e t t i n g s t a r t e d
6
Note that if you have the keylock of your
phone on, the keylock is automatically
deactivated after you have attached the
adapter into the phone. Note also that if
you have the Silent profile on in your
phone, the automatic answering does
not work. Also Lights off mode in your
phone should be activated, because
having the lights continuosly on reduces the battery life.
phone on, the keylock is automatically
deactivated after you have attached the
adapter into the phone. Note also that if
you have the Silent profile on in your
phone, the automatic answering does
not work. Also Lights off mode in your
phone should be activated, because
having the lights continuosly on reduces the battery life.
Pairing the device
Switch on the power before you start to pair your headset with the
Nokia Wireless Audio Adapter. Make sure no other headsets or other
compatible audio devices are active within a 10 metre range.
Nokia Wireless Audio Adapter. Make sure no other headsets or other
compatible audio devices are active within a 10 metre range.
1. Attach the adapter into the Pop Port connector of your phone. Wait
for the slow red blink. Select the PIN entry mode by pressing once the
Control key in the Wireless Audio Adapter to make the adapter find
the compatible headset.
Control key in the Wireless Audio Adapter to make the adapter find
the compatible headset.
If a compatible headset is found, the light indicator in the adapter is
continuously green for 20 seconds. During that time you need to
start keying in the Bluetooth passkey on the phone keypad.
continuously green for 20 seconds. During that time you need to
start keying in the Bluetooth passkey on the phone keypad.
If there are no headsets with compatible Bluetooth wireless
technology within a 10 metre range, the light indicator blinks red to
indicate an error situation. The adapter then goes into Init mode and
blinks slowly a red light. See Modes of the light indicator on page 8.
technology within a 10 metre range, the light indicator blinks red to
indicate an error situation. The adapter then goes into Init mode and
blinks slowly a red light. See Modes of the light indicator on page 8.
2. When the light indicator on the Nokia Wireless Audio Adapter is
continuously green, you can key in the four-digit Bluetooth passkey
on the phone to pair the headset. The digits are shown on the phone
display. End the passkey entry by pressing
on the phone to pair the headset. The digits are shown on the phone
display. End the passkey entry by pressing
. The Bluetooth passkey
is marked on the card that is provided in the sales package of the
headset.
headset.
3. If the pairing is successful, the phone display is cleared. The light
indicator on the Nokia Wireless Audio Adapter is turned off and
appears on the phone display.
AD-5B_1en.fm Page 6 Monday, November 17, 2003 10:03 AM