Справочник Пользователя для Microsoft Corporation AD-5B
G e t t i n g s t a r t e d
7
The headset, whose passkey you enter first, becomes the default
device for the Wireless Audio Adapter.
device for the Wireless Audio Adapter.
4. The Wireless Audio Adapter and the headset are now ready to be
used.
Note that all audios, including the call alert tones, are now routed to
the headset.
the headset.
If the pairing is unsuccessful, either press the Control key once briefly or
detach the adapter from your phone, and start the pairing procedure
again from step one above.
detach the adapter from your phone, and start the pairing procedure
again from step one above.
Pairing multiple headsets
To pair another headset to the adapter, just repeat the procedure above.
However, make first sure that the headset that has already been paired
is turned off, and that only the new unpaired headset is within a 10
metre range of the adapter. Note that the adapter can be
simultaneously paired with two headsets only.
However, make first sure that the headset that has already been paired
is turned off, and that only the new unpaired headset is within a 10
metre range of the adapter. Note that the adapter can be
simultaneously paired with two headsets only.
When using the headsets, the adapter first tries to find the default user,
which is the first paired headset, and then the secondary headset. If you
want to pair more headsets, the new headset replaces the secondary
user. You can replace the secondary user as many times as you want. If
you want to replace the default user, you need to reset the adapter.
Note that since the reset clears the memory of the adapter, the
secondary user is reset as well.
which is the first paired headset, and then the secondary headset. If you
want to pair more headsets, the new headset replaces the secondary
user. You can replace the secondary user as many times as you want. If
you want to replace the default user, you need to reset the adapter.
Note that since the reset clears the memory of the adapter, the
secondary user is reset as well.
■ Resetting headsets
Reset clears all pairing and user data information. To reset the adapter,
press and hold the Control key for 10 seconds. The reset is confirmed
with an alternating red and green blink for another 10 seconds.
press and hold the Control key for 10 seconds. The reset is confirmed
with an alternating red and green blink for another 10 seconds.
Your headset may accept only a limited number of pairings and may
need to be reset to make the pairings. For resetting your headset, refer
to the user guide for the headset.
need to be reset to make the pairings. For resetting your headset, refer
to the user guide for the headset.
AD-5B_1en.fm Page 7 Monday, November 17, 2003 10:03 AM