Справочник Пользователя для Microsoft Corporation AD-5B
G e t t i n g s t a r t e d
9
The adapter is in the Audio linked mode, which means that there is a
call in progress and the audio has been linked to the headset.
call in progress and the audio has been linked to the headset.
• Alternating red and green blink for 10 seconds (on for 0.5 seconds,
off for 0.8 seconds)
The adapter is in the Reset mode. When the reset has been
successful, the light indicator blinks red.
successful, the light indicator blinks red.
• No indication from the light indicator
The adapter is in Power saving mode, which means that it is
switched off. When the adapter is switched off, the light indicator
blinks once in red for confirmation. In this mode the icon
switched off. When the adapter is switched off, the light indicator
blinks once in red for confirmation. In this mode the icon
disappears from the phone display and the calls are routed to the
phone normally. To return to Init mode, press Control key once.
phone normally. To return to Init mode, press Control key once.
■ Transferring audio signals
If you press Control key once briefly during a call in Audio Linked mode,
the audios are transferred to the phone and the call is continued
normally. If you want to transfer the audios back to the headset, press
Control key of the adapter or Headset key.
the audios are transferred to the phone and the call is continued
normally. If you want to transfer the audios back to the headset, press
Control key of the adapter or Headset key.
If your phone is in Idle mode, you can transfer the audios from the
headset to the phone by pressing Control key once briefly. To transfer
the audios back to the headset, press Control key of the adapter or
Headset key.
headset to the phone by pressing Control key once briefly. To transfer
the audios back to the headset, press Control key of the adapter or
Headset key.
Note that when the audios have been transferred to the headset, all
audios including the call alert tones are routed to the headset.
audios including the call alert tones are routed to the headset.
■ Accidental disconnection of the wireless audio
adapter
If, during a call, the adapter is accidentally disconnected from the Pop-
Port connector or the headset battery runs flat, the call is transferred to
the phone and is continued normally. The pairing information stays
stored in the permanent memory of the adapter.
Port connector or the headset battery runs flat, the call is transferred to
the phone and is continued normally. The pairing information stays
stored in the permanent memory of the adapter.
If the 10 metre range between the adapter and the headset is exceeded,
or for some other reason the radio connection between the headset and
the adapter is lost, the adapter and the headset try to restore the lost
or for some other reason the radio connection between the headset and
the adapter is lost, the adapter and the headset try to restore the lost
AD-5B_1en.fm Page 9 Monday, November 17, 2003 10:03 AM