Справочник Пользователя для Microsoft Corporation DC-50

1.  Charging area for charging the 

phone

2.  Battery level and charging 

indicators

3.  Charging cable connector

4.  Power indicator key

5.  Charging area for charging the plate

6.  Phone charging indicator

The surface of this product is nickel-

free.

Some of the accessories mentioned in 

this user guide may be sold separately.

1. To charge wirelessly, place the 

charging plate on a wireless charger. 

Make sure the charging areas on the two 

devices touch.
Alternatively, when using a USB charger 

or a computer, first put the micro-

USB end of the cable in the charger 

connector of your charging plate. Then 

put the USB end of the cable into the 

charger and plug the charger into a 

wall outlet, or connect the cable to a 

computer.
The battery level and charging indicators 

show the charging progress by blinking 

steadily while the battery is charging. 

The charging time may vary depending 

on the charging method.

If the charging plate becomes too warm, 

it automatically stops charging for a 

while.
2. When the battery is full, take your 

plate off the wireless charger, or 

disconnect the USB cable from your 

charging plate and the charger from the 

wall outlet.

1. To charge wirelessly, place the 

charging plate on a wireless charger so 

that the charging areas touch.
Alternatively, connect your charging 

plate to a USB charger or a computer.
2. Place your phone on the charging 

plate so that the charging areas touch.

When you want to learn more about 

your device, or if you’re unsure how your 

device should work, there are several 

support channels for you to check.
To help you get the most out of your 

device, you can explore www.nokia.com/

support.
There you can find:
•  Full-length user guides
•  Troubleshooting info
•  Discussions
•  News on apps and downloads
•  Further details about features and 

technologies, and the compatibility of 

devices and accessories

Troubleshooting and discussions may 

not be available in all languages.
The Federal Communications 

Commission (FCC) certification requires 

the following user instruction: This 

device is intended for desktop use and 

should not be used next to your body. 

This device has been tested to comply 

with RF exposure limits at 10 cm from 

the body.

Place your phone on top of the charging 

plate so that the charging areas on the 

two devices touch.
The battery status indicators switch 

on for 10 seconds, showing you the 

battery charging level. The phone 

charging indicator is on when the phone 

is charging.
If the charging plate becomes too warm, 

it automatically stops charging for a 

while.
When you’re travelling, or when you 

don’t need the charging plate for a 

while, you can switch it off. Press and 

hold the power indicator key for 5 

seconds. Switch the plate back on by 

pressing the power indicator key again, 

or by connecting to a USB cable.

11111111 / 1.0

EN

XX

XX

XX

XX

XX