Справочник Пользователя для CipherLab Co. Ltd. 1664

 

 

25

 

Update 

 

Chapter 1

    錯誤!  使用  [常用]  索引標籤將 Heading 1 套用到您想要在此處顯示的文字。

 

1)  Read the barcode above to specify the time interval before the scanner automatically 

turns off. 

2)  Read the “

Decimal Value

” barcode on page 251. For example, read “1” and “5” for the 

scanner to automatically turn off after being idle for 15 minutes.   

3)  Read the “Validate” barcode on the same page to complete this setting. 

Note:  Auto Power Off will not take effect when the scanner is in the configuration mode. 

 

1)  Read the barcode above to specify the time interval before the scanner enters 

low-speed mode. 

2)  Read the “

Decimal Value

” barcode on page 251. For example, read “5” for the 

scanner to enter low-speed mode after being idle for 5 minutes.   

3)  Read the “Validate” barcode on the same page to complete this setting. 

Note:  Power-Saving will not take effect when one of the following conditions is met: 

  (1) The scanner is in the configuration mode.   

 

 

 

 

  (2) The Power-Saving value is set to 0.                                                                                                                    
(3) The setting value of Power-Saving is greater than that of Auto Power Off.