Справочник Пользователя для Cardo Systems ER17

(between cardo SHO-1 

and scala rider G9 only)

2-way Intercom conversations 

within a group of up to eight other 

“One+8” Buddies 

(with other scala rider 

models)

Intercom Conferencing (2-way,  

3-way and 4-way) using Channels 

“A” and “B”

Click-to-Link 
(with compatible 

models)

1-on-1 spontaneous intercom 

conversations with random riders 

near you who are not already 

paired to your cardo SHO-1

Pair with up to 8 other devices (“One+8” Buddies) and 

connect with them one at a time by saying their name.

Before using “One+8” Intercom, you should assign your device a 

Buddy Name, so that other “One+8” participants can call you by 

this name.
If you change your Buddy Name, you must pair again with your 

“One+8” Buddies for their device to receive your new Buddy Name.

Visit the Cardo Community to configure your Buddy Name (see 

Section 3). Until you configure a Buddy Name, your unit will be 

known by its generic “One+8” Buddy name, “cardo SHO-1”. 

In Standby, tap 

 and 

 simultaneously. You will 

hear the Buddy name of your cardo SHO-1 through the 

speakers.

In Standby, press 

 for 2 seconds

1.  In Standby, press 

 for 5 seconds to enter pairing mode. 

2. Repeat on the second cardo SHO-1.  
3.  If pairing was successful, a purple light appears for 2 seconds.

You can also find your friends and add them to your “One+8” 

Buddy list via the Cardo Community website at:  

You can see which units within a range of 20m are your “One+8” 

Intercom Buddies. 

In Standby, press 

 and 

 for 2 seconds

If “One+8” Buddies are within range, the LEDs on both 

units will turn PURPLE for 2 seconds

There are two ways to start an intercom call with “ONE+8” buddies.

 

Speak any word loudly into the microphone. When you hear the 

Voice Command tone, say the name of a ”One+8” Intercom Buddy 

i.e. “John Smith”

|