Справочник Пользователя для Cardo Systems ER17

☛

OPTION 2: Manual Mode

SAY THE NAME

CHOOSE THE NAME

(from your Buddy List):

Tap

and say the name of

the “One+8” Buddy

Press

for 2 seconds. Hear

the names of all pre-paired

“One+8” buddies.

When you hear the name

of the Buddy you wish to

call, tap

or say any word

loudly into the microphone.

To cancel Buddy List playback:

Press

for 2 seconds.

5.2 INTERCOM WITH CHANNELS “A” AND “B”

Start multi-party conversations using Intercom Channels “A” and

“B”. This mode is suitable for 2, 3 or 4-way calls.

5.2a PAIRING INTERCOM CHANNELS “A” AND “B”

Pairing a Channel will replace any existing paired device on that

Channel with the newly paired device.

If you have purchased the cardo SHO-1 DUO, both units are

factory-paired and configured to communicate via Channel “A”. If

for any reason you have to pair them again, OR if you wish to pair a

different unit to make Intercom calls, proceed as follows:

1. Check that all units are in Standby.

2. Press

for 5 seconds until the LED begins flashing rapidly,

indicating it is in Intercom Pairing mode (see table below for

channel pairing).

3. Enter Intercom Pairing mode on the second unit following its

user manual. Both units will now be in Intercom Pairing mode.

4. After a few seconds, both units will show a solid LED for 2 seconds,

indicating that they are paired and ready to use.

5. If Pairing is not completed within two minutes, the units will

return to Standby mode.

CHANNEL PAIRING METHOD

LED INDICATORS

“A”

In Standby, press

for 5 seconds.

Channel “A” pairs automatically.

Rapid RED

flashing

“B”

In Standby, press

for 5 seconds.

When LED begins flashing , tap

twice.

Rapid BLUE

flashing

5.2b CALLING INTERCOM CHANNELS “A” AND “B”

There are two ways to start an intercom call with Channels “A” and “B”

OPTION 1: Voice Connect (VOX)

Speak any word loudly into the microphone. When you hear the

Voice Command tone, say “Call Intercom” to start an intercom call

with “A” and/or “B” (subject to who is present)
VOX Intercom call with only “A” or “B” will end automatically after

30 seconds of silence.

☛

OPTION 2: Manual Mode

Use this to start an Intercom call with either:

• Channel “A”: Tap
• Channel “B”: Double-tap

To end a call tap

If you are already in an Intercom call with “A” or “B”, you can add

another rider (“A” or “B”) by tapping

, or another rider can join

the intercom call in the same way.

English

cardo SHO-1