Справочник Пользователя для SendFar Technology Co. Ltd. WPC-02005

 

17

 

 

 
 
 

 

18

 

NetBEUI is a protocol you can use to connect to Windows NT, Windows for 
Workgroups, or LAN Manager servers. If you work on Microsoft network 
environment, you need to set up NetBEUI protocol. 

1.  Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for 

Microsoft Networks. 

2. Select 

Configuration tab to check NetBEUI -> Wireless LAN PC Card is 

installed. If no, click the Add button. Select Protocol and click the Add button. 

3. Select 

Microsoft for Manufacturer and NetBEUI for Network Protocol, and then 

click OK. 

 

TCP/IP is the protocol you use to connect to the Internet and wide-area 
networks. If you want to connect to Internet, you need to set up TCP/IP 
protocol. 
1.  Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for 

Microsoft Networks. 

2. Select 

Configuration tab to check TCP/IP -> Wireless LAN PC Card 

is installed. If no, click the Add button. Select Protocol and click the 
Add button. 

3. Select 

Microsoft for Manufacturer and TCP/IP for Network Protocol, 

and then click OK. 

4.  If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP 

properties as shown in Figure 3-2. Due to different network 
applications there are many different settings here. You can select 
either Obtain an IP address automatically or Specify an IP address. 
If you use the Specify and IP address, then you need to enter an IP 
address, Subnet Mask, Gateway IP address, and DNS Server IP 
address for connecting to Internet.