Справочник Пользователя для SendFar Technology Co. Ltd. WPC-02005
Version 1.7.37R2
15
Figure 2-8
2.4 Uninstalling Driver and Utility
If the PC Card installation is unsuccessful for any reason, the best way to
solve the problem may be to completely uninstall the PC Card and its
software and repeat the installation procedure again.
1. Insert the Wireless LAN PC Card into the PCMCIA slot.
2. Right click My Computer--->Select Properties.
3. On the Hardware tab, choose Device Manager, and click Network
solve the problem may be to completely uninstall the PC Card and its
software and repeat the installation procedure again.
1. Insert the Wireless LAN PC Card into the PCMCIA slot.
2. Right click My Computer--->Select Properties.
3. On the Hardware tab, choose Device Manager, and click Network
Adapter. Choose Intersil PRISM Wireless LAN PC Card and remove
it.
4. After removing the Intersil PRISM Wireless LAN PC Card, restart
your computer.
5. Click the Start button, select Control Panel from Settings. Double click
the Add/Remove Programs icon on the Control Panel. In the Change or
Remove Programs dialog window, choose the Intersil PRISM Wireless
LAN for Windows and click Change/Remove button to uninstall this
programs.
Remove Programs dialog window, choose the Intersil PRISM Wireless
LAN for Windows and click Change/Remove button to uninstall this
programs.
Version 1.7.37R2
16
Chapter 3. Connecting to a Network
This chapter describes how to prepare for connection to network after
install the PC Card drivers and utility.
The following is required for all computers if you want to connect to a
network.
1. Check
install the PC Card drivers and utility.
The following is required for all computers if you want to connect to a
network.
1. Check
Client for Microsoft Networks is installed.
2. Check
NetBEUI -> Wireless LAN PC Card installed.
3. Check
TCP/IP -> Wireless LAN PC Card is installed.
4. Check file and printer sharing for Microsoft Networks.
5. Check computer name and workgroup name.
5. Check computer name and workgroup name.
3.1 Checking and Adding Client for Microsoft
Networks
Networks
The Client for Microsoft Networks enables you to connect to other Microsoft
Windows computers and servers and use the files and printers shared on
them. If you work on Microsoft network environment, you need to set up
Client for Microsoft Networks.
1. After finishing installing the driver & utility and rebooting the computer
Windows computers and servers and use the files and printers shared on
them. If you work on Microsoft network environment, you need to set up
Client for Microsoft Networks.
1. After finishing installing the driver & utility and rebooting the computer
as described in Chapter 2. The computer will show a dialog box titled
Enter Network Password dialog box. Enter your password if it had
been set or just click Cancel.
Enter Network Password dialog box. Enter your password if it had
been set or just click Cancel.
2. Click
Start button, select Settings and then click Control Panel to
open the Control Panel window.
3. In
the
Control Panel window, double-click the Network icon to open
the Network dialog box.
4. .
Select
Configuration tab to check Client for Microsoft Networks is
installed as shown in Figure 3-1. If no, click the Add button. Select
Client and click the Add button.
Client and click the Add button.
5. Select
Microsoft for Manufacturer and Client for Microsoft Networks
for Network Client, and then click OK.