Справочник Пользователя для Controlled Electronic Management Systems Ltd S3040RH
S3040-IM-0056-1.3
CHAPTER 1 : Introduction
6
1.4 Charging the S3040
To charge the S3040 reader:
1.
Fit the appropriate converter plug (region dependent) to the AC adapter.
2.
Connect the DC jack end of the AC adapter to the rear of the S3040 docking cradle. There
are only two connection ports on the docking cradle. One is the round AC adaptor port (the
correct port for the DC jack end) and the other is a mini-USB port. (See Figure 4)
are only two connection ports on the docking cradle. One is the round AC adaptor port (the
correct port for the DC jack end) and the other is a mini-USB port. (See Figure 4)
Figure 4 Docking cradle charging port
3.
Connect the plug end into a wall power outlet.
4.
Set the S3040 unit into the docking cradle as shown in Figure 5.
Figure 5 S3040 placed into docking cradle
5.
Check that the charge notification indicator on the S3040 and on the docking cradle glows
amber. This indicates that charging is in progress.
amber. This indicates that charging is in progress.
Note
It is recommended that the user does not disconnect the S3040 from the docking cradle until
the battery is fully charged. The user is notified of this by the amber indicator turning green.
This will take 12 hours for the initial first charge and up to 3.5 hours for all subsequent charges.
the battery is fully charged. The user is notified of this by the amber indicator turning green.
This will take 12 hours for the initial first charge and up to 3.5 hours for all subsequent charges.
AC adapter
port
port
Docking
cradle for
S3040
cradle for
S3040
S3040 charge
notification
indicator
notification
indicator
Docking cradle charge
notification indicator
notification indicator