Справочник Пользователя для Controlled Electronic Management Systems Ltd S3040RH
S3040-IM-0056-1.3
CHAPTER 4 : S3040 Software Configuration
22
4.2 Enabling the Portable Subsystem on the CDC
Before using S3040 readers in the AC2000 system, this option will need to be enabled on the
CDC by taking the following steps:
CDC by taking the following steps:
1.
Open a SSH terminal emulator connection (such as Putty) with the CDC.
2.
Login as user: root
3.
Type I in the command line and press return to display the Integrations menu.
Figure 25 Integrations menu in terminal emulator
4.
Type option number corresponding with Portables subsystem (17 in this example) and
press Enter.
press Enter.
5.
Press Return when prompted after all enabling script has run and this displays the
integrations menu again.
integrations menu again.
6.
Type x and press Return to exit integrations menu.
7.
Type L and press Return to log out of terminal emulator session.
4.3 Assigning the CDC IP Address to the S3040
1.
Set the S3040 into the docking cradle.
2.
Switch on the S3040 reader.
3.
Tap the central icon on the S3040 touchscreen or press the OK keypad button (with the Fn
button activated) to access the S3040 main Options interface.
button activated) to access the S3040 main Options interface.
4.
Tap the Settings button in the S3040 main Options interface.
5.
Tap the Server touchscreen button. This highlights the button and activates the PIN to set
Server IP address keypad, which allows access in to change the Server IP address.
Server IP address keypad, which allows access in to change the Server IP address.
6.
Type 48625 into the keypad and press OK.
7.
Add the AC2000 Server (CDC0) IP address and press OK.
4.4 Downloading the Database from AC2000
Once the S3040 is connected to the AC2000 Server (CDC0), it downloads two databases - the
cards database and the images database.
cards database and the images database.
The databases are downloaded automatically to the reader when it is placed into the docking
cradle for the first time after initial connection to the server, during the setup process. This may
take a considerable length of time, depending on the number of images in the database and
this process may be run overnight for large databases. The progress of the download is
indicated on the S3040 screen by a status bar. When it has finished downloading, the
database status indicator will change from Expired to Ready by displaying a green tick.
cradle for the first time after initial connection to the server, during the setup process. This may
take a considerable length of time, depending on the number of images in the database and
this process may be run overnight for large databases. The progress of the download is
indicated on the S3040 screen by a status bar. When it has finished downloading, the
database status indicator will change from Expired to Ready by displaying a green tick.
Note
If failure occurs when downloading the database, an error message will be displayed.