Справочник Пользователя для Redline Communications Inc. AN100UXA
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 120 of 136
April 19, 2010
7.6
RedMAX Backhaul Application
The RedMAX equipment can be configured to operate as a PTP backhaul link to provide
backhaul services to a remote location (e.g., RedMAX PMP network). This can reduce
capital and operational expenses (training, spare parts, etc) when compared to
purchasing other models or manufactures equipment to provide this service. There are
no hardware, software, or configuration changes required for any RedMAX subscriber or
base station used for backhaul operations.
backhaul services to a remote location (e.g., RedMAX PMP network). This can reduce
capital and operational expenses (training, spare parts, etc) when compared to
purchasing other models or manufactures equipment to provide this service. There are
no hardware, software, or configuration changes required for any RedMAX subscriber or
base station used for backhaul operations.
7.6.1 Base Station Configuration
There are three specific configuration settings required to enable the RedMAX base
station for backhaul operation (no configuration change is required for the subscriber).
station for backhaul operation (no configuration change is required for the subscriber).
Service Class
Create one service class with the following settings:
SC Name:
Backhaul
Scheduling Type:
BE
Traffic Priority
0
Max Sust Rate
25400000
Service Flows
Click
Service Flows
in the menu (left side of screen) and create two service flows with
the following settings. Enter the following settings for the upstream service flow.
SS Name:
[subscriber name]
Direction:
upstream
SC Name:
Backhaul
Cs Specification:
802.3 Ethernet.
Enter the following settings for the downstream service flow.
SS Name:
[subscriber name]
Direction:
downtream
SC Name:
Backhaul
Cs Specification:
802.3 Ethernet.
Classifiers
Click
Classifiers
in the menu (left side of screen) and enter the same settings for the
upstream and downstream service flows:
DestMacAddr: Check to enable field. Enter a value of all zeros (00:00:00:00:00:00).
DestMacMask: Enter a mask of all zeros (00:00:00:00:00:00).
Synchronization
Click Wireless Interface in the menu (left side of screen) and select the following
settings in the MAC Parameters section of the page:
settings in the MAC Parameters section of the page:
Adaptive TDD: Check
box to activate dynamic uplink/downlink setting. A log
message is created when Adaptive TDD is enabled and disabled. This feature is
enabled only when Synchronization Mode = No Sync.
enabled only when Synchronization Mode = No Sync.
Synchronization Mode: No Sync The synchronization function must be disabled to
enable use of the Adaptive TDD.
enable use of the Adaptive TDD.