Справочник Пользователя для Redline Communications Inc. AN100UXA
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 98 of 136
April 19, 2010
Table 44: CLI - snmpAccCtrl
EntryIndex: Unique index number to identify this table entry.
Read Community Name: The SNMP community name with read access.
Write Community Name: The SNMP community name with write access.
Manager Address: The IP address of the SNMP manager.
alias <alias name> <replacement text>
alias name: Text to be replaced
replacement text: Text to substitute for alias
delete <EntryIndex> [All | YesToAll]
<EntryIndex> - Entry index number.
All: Remove all the entries except the first one.
YesToAll: Confirmation to remove all entries.
edit <index> <ReadCommunity> <WriteCommunity> <ManagerIpAddress>
EntryIndex: Unique index number to identify this table entry.
Read Community Name: The SNMP community name with read access.
Write Community Name: The SNMP community name with write access.
Manager Address: The IP address of the SNMP manager.
show
<< SNMP Access Control Table >>
Index: Read Access string: Write Access string: IP Address:
1 public private 0.0.0.0
5.2.11 softwareConfig
The softwareConfig command is used to load new software binary files on the base
station. See section 4.5.2: Software Upgrade on page 75.
station. See section 4.5.2: Software Upgrade on page 75.
Table 45: CLI - Software Upgrade Command
Command
Parameter/Description
backup
Save a backup copy of the base station settings on a remote FTP server.
Server: IP Address of the FTP server.
File:
Server: IP Address of the FTP server.
File:
Use this name when saving the configuration backup file.
Which: Specify the settings to be saved:
0 - Alternate configuration.
1 - Active configuration.
For example:
backup 192.168.20.100 BS_024-061108.cfg 1 <ENTER>
You will be prompted by the FTP server to enter a valid username and
password.
restore
Restore the base station settings using a backup copy previously saved on a
remote FTP server.
Server: IP Address of the FTP server.
File:
File:
Use this name when saving the configuration backup file.
Which: Specify the settings to be saved:
0 - Alternate configuration.
1 - Active configuration.
For example:
restore 192.168.20.100 BS_024-061108.cfg 1 <ENTER>
You will be prompted by the FTP server to enter a username and password.