Справочник Пользователя для Huawei Technologies Co. Ltd RRU3260

NOTE

Crimp OT terminals in correct positions, as shown in

Figure 9-11 Correct position of an OT terminal

Step 3 Label the installed cables according to the instructions in Attaching a Cable-Tying Label.

----End

9.6 Installing an RRU RF Jumper

This section describes the procedure for installing an RRU RF jumper.

Procedure

Step 1 Connect the DIN male connector at one end of the RRU RF jumper to the ANT port on the RRU,

and use a torque wrench to tighten the connector to 25 N·m (221.27 lbf·in.), as shown in

Figure 9-12 Installing an RRU RF jumper

RRU3260
Installation Guide

9 Installing RRU Cables

Issue ()

Huawei Proprietary and Confidential

104