Справочник Пользователя для 3e Technologies International Inc. 523E-900
AirGuard WiMesh 3e-
523 Series User’s Guide
Copyright
2015 Ultra Electronics, 3eTI
October 2015
16
29000169-005 Revision C1
2.2.3 System Deployment
The unit is programmed at the factory with the customer's country code. The country code (region) is
read-only. The channel list and transmit power varies from region to region based on each country's
regional regulations (see Figure 9).
read-only. The channel list and transmit power varies from region to region based on each country's
regional regulations (see Figure 9).
Figure 9 - System Configuration - System Deployment
2.2.4 WAN
Click the entry on the left hand navigation panel for System Configuration - WAN. This directs you to the
System Configuration - WAN screen (Figure 10).
System Configuration - WAN screen (Figure 10).
If not using DHCP to get an IP address, input the static IP information that the access point requires in
order to be managed from the wired LAN. This will be the IP address, Subnet Mask, Default Gateway, and,
where needed, DNS 1 and 2.
order to be managed from the wired LAN. This will be the IP address, Subnet Mask, Default Gateway, and,
where needed, DNS 1 and 2.
Click Apply to accept changes.