Справочник Пользователя для 3e Technologies International Inc. 527A3

The Monitoring/Report — Wireless Clients screen displays the MAC 

Address of all wireless clients and their signal strength and transmit rate. 

The screen shown here emulates the FIPS 140-2 setup and contains a col-

umn for EMCON response. The EMCON feature only works with 3e-010F 

Crypto Client in FIPs mode.

 

If Transmit power is disabled, either by setting TX Pwr Mode to Off 

on the management screen or by using the RF Manager (Chapter 7), the 

Wireless Clients page will show the results from each associated client 

in the EMCON Response column. If the client responds to the "disable" 

command, a Yes is displayed. If the column contains a No, this can mean 

either:

•  the client didn't receive the command, or

•  the client is no longer in the areas, or

•  the client software doesn't support the RF management feature.

This status information remains active for 5 minutes after the clients 

are disabled.