Справочник Пользователя для 3e Technologies International Inc. 527A3

Once the transmit power is re-enabled and clients re-associate to the 

AP, EMCON information is maintained for them. If a new client that 

wasn't associated previously associates with the AP after the EMCON 

mode, its EMCON status appears as "-", which indicates the status record 

is not applicable.

The Monitoring/Report — Adjacent AP List screen shows all the APs 

on the network. If you select the check box next to any AP shown, the AP 

will thereafter be accepted by the 3e–527A3 as a trusted AP.

These APs are detected by the AP's wireless card (2.4 GHz band) and 

the wireless bridge's wireless card (5.8GHz band). The list of APs are only 

within the band that can be seen from a particular channel. For example, 

if the AP is on channel 1, it will display APs on channels 1-3. Adjacent 

APs are displayed for five minutes.