Справочник Пользователя для Continental Conair Limited GH5811
Prepare By: Dreamis So
P.13
29/3/2004
Installation
Box Contents
Before installing your phone, check the shipping carton to be sure you have the
following:
following:
Base Unit
Quick Installation Guide
Long Telephone Line Cord
AC Adaptor with Cord
Remote Access Card
Owner’s Manual
Handset with Rechargeable Battery Belt Clip
Dual Handset with Rechargeable
Battery (For GH5852 only)
Battery (For GH5852 only)
1 Wall Mount Stand
Notes:
a. Keep the shipping carton and packaging, in case you need to ship your phone.
b. If there is visible damage, do not use this equipment. Contact your shipping
agent or return the telephone to the place of purchase.
Preliminary Preparation Telephone Line Installation
1. Never install telephone jack during a lightning storm.
2. Never install telephone jack in wet location unless the jack is specifically
2. Never install telephone jack in wet location unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
Modular Outlet
The GH5850/5852 Cordless Telephone operates from a standard 110/120 volt AC
outlet. The handsets are powered by a rechargeable battery pack. Batteries are
charged automatically when the handset is placed in the cradle of the base unit or
charging unit.
Table/Desk Installation
A. Plug one end of the long telephone line cord into the back of the unit and
connect the other end to a modular wall jack. Press until locking lever clicks.
B. Connect the DC Adaptor into the back of the unit. Plug the other end into a
standard 110/120 volt AC outlet.
C. Place the handset into the base unit. The CHARGE LED will light. The LCD
display will show “Initialization” for 2 minutes and then return to standby mode.
During these 2 minutes, user can pick up the phone and operate it in standby
mode.
During these 2 minutes, user can pick up the phone and operate it in standby
mode.
NOTE: BATTERY PACK MUST BE CHARGED FOR 16 HOURS BEFORE
INITIAL OPERATION.