Справочник Пользователя для Harsper Co. Ltd. HP-425B
Installation
17
OWNER'S MANUAL
• Be sure monitor power is turned off before making any connections.
Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect
the positive "+" wire to the "+" input and the negative "-" wire to the "-" input. Connect left monitor input to left speaker
and right monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders
provided. (Caution: Once installed, the speaker wire holders lock into position and can't be removed.)
the positive "+" wire to the "+" input and the negative "-" wire to the "-" input. Connect left monitor input to left speaker
and right monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders
provided. (Caution: Once installed, the speaker wire holders lock into position and can't be removed.)
• Always lift the monitor itself (not the speakers) when handling or moving the monitor after speakers have been
installed.
Speaker Installation (Optional)
* CAUTION : Please make sure speaker wires should be
connected as above, ferrite core are to be
nearer to the main unit not to speakers to
avoid possible electromagnetic-interference.
nearer to the main unit not to speakers to
avoid possible electromagnetic-interference.
4 - Iron Plates
(Mount speakers to monitor)
16 - 4 x 10 Long Bolts
(Attach iron plates to speakers)
2 - Speaker Wires
2 - Speaker Wire Holders
(For arranging the speaker wires)
Speaker Accessories
To
Main Unit
Main Unit
To
Speaker
Speaker
SPEAKER (8Ω)
SPEAKER (8Ω)
Ferrite
Core
Core
Wire
Saddle
Saddle
Wire
Saddle
Saddle