Справочник Пользователя для Harsper Co. Ltd. HP-425B
Connecting the VCR
19
OWNER'S MANUAL
Press INPUT button on the remote control and select video sources.
Insert a video tape into the VCR and press the PLAY button on the VCR.
With S-Video
Connect a S-Video cable to the S-Video jacks of the VCR and the monitor.
Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor.
Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor.
With AV Input
Connect a composite cable to the AV video jacks of the VCR and the monitor.
Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor.
Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor.
Connecting the VCR
Watching VCR
• To avoid picture noise (interference), leave an adequate distance(over 3m) between the VCR and monitor.
• When connecting the monitor with external equipment, match the color of connecting ports (e.g. Video -Yellow,
Audio(L) - White, Audio(R) - Red).
• If you have a mono VCR, connect the audio cable from the VCR to the Audio(L/Mono) input of the monitor.
• If you connect an S-VHS VCR to the S-Video input socket, you can get a better picture quality than normal video
input (AV).
• When both S-Video and AV are connected at the same time, S-Video has a priority than AV. (When S-Video is
connected and has no Signal, the monitor displays “No Signal” on the screen.).
To watch AV mode, you should disconnect S-Video.
To watch AV mode, you should disconnect S-Video.
1
2
AV 1
AV 2
AV 3 Input
S-Video
Sound of
S-Video/AV
S-Video/AV